Home Articles Xbox 360 Red Ring of Death Fix – Does the Fix Actually...

Xbox 360 Red Ring of Death Fix – Does the Fix Actually Work to Get Your Console Working Again?

5
0
SHARE

One of the most common problems which occur in Xbox 360 consoles is the red ring of death or otherwise known as red ring of death. Because there are so many videos posted on how you can fix this problem, you may even wonder if they actually work. To be honest, most of these fixes don’t work.

There are several reasons why. These fixes have been created by gamers. Maybe there are some who have really have the best intentions, but for sure, they definitely are not the experts. Luckily, there is one fix which actually works. But before that, there are some things which you will need to avoid.

These are the fixes which will tell you to freeze your console, penny tricks, towel tricks, and even submerging the Xbox 360 in vinegar which has been diluted! Obviously, they do not work and can sometimes cause more permanent damage. Since most issues have been caused by overheating, the above mentioned tricks are will not work.

If you really want to fix your console, you will have to go directly to the problem source. In addition, if your warranty is over, you should not send your Xbox 360 to Microsoft so they can repair it. They will only charge you almost $140 for repairing it as well as an additional $50 charge for shipment. You will also have to endure 2 whole months without your console since this is the normal waiting period.

There are several other ways you can get this fixed. You can either fix it yourself or call someone to fix it. If you decide to fix it yourself this is what you need to do.

The main cause of this issue is overheating. This is usually caused by the X-clamps that are mounted on the bottom of the main board flexing and allowing the heatsink on the graphics processor to move, allowing it to overheat.

You need to remove these clamps and refix them. To do this you will need to remove the glue and paste then undo them. A lot of people have found problems removing this glue and one of the best ways to do this is with “glue be gone”. Once you have done this you will need to refix the clamps, you may need to put washers between the clamps and the board and once this is done the console should work.

If your Xbox 360 is failing with 3 red lights here is the #1 solution for the ring of death [http://viperarsenal.com] this is guaranteed to fix the problem click here [http://viperarsenal.com] to get your Xbox working.

Submitted On November 20, 2009Console SystemsOne of the most common problems which occur in Xbox 360 consoles is the red ring of death or otherwise known as red ring of death. Because there are so many videos posted on how you can fix this problem, you may even wonder if they actually work. To be…rrod fix actually

You May Also Like =)